






SQUARE NATURAL MARBLE FLUSH MOUNT | CLFGT014S
Taxes exclues Frais d'envoi calculés au paiement
Or 3 interest-free payments of $232.24 with Klarna
Estimated Shipping Widget will be displayed here!
Engineer Tested
& UL Certified
Free Insured
Shipping
30-Day
Returns
Our advisors are happy to assist you throughout your projects.

Estimated Shipping Widget will be displayed here!
Solid carved alabaster. One block.
A square block of hand-carved Italian alabaster, hollowed from a single piece of stone, mounted to a slim solid brass frame and set flush against the ceiling. No panels, no assembly seams, no glued-together construction. The entire fixture body is one continuous block of carved stone — the way alabaster lighting was made before contemporary panel-assembly methods made it cheaper to fake.
Solid carving matters at this scale. A 45cm or 60cm alabaster cube is significant material — most fixtures in this category are built from four assembled panels plus a top plate, with visible seams at the corners. Carving from a single block requires starting with a much larger raw stone (typically 50-100% larger than the finished cube) and removing the interior by hand. The result reads visually different from panel-assembled flush mounts: no seam lines, continuous veining wrapping around the corners, and the light from inside catches differently because there are no assembly gaps.
Where it belongs:
[QUADRO 35 — 14"]
- In a bathroom as primary ceiling lighting (especially over freestanding tubs, where the IP65 rating becomes essential).
- In a closet, dressing room, or pantry where chandeliers don't fit but ceiling light still needs to feel intentional.
- In a hallway as part of a series — Quadro 35 reads well in lines of 3-5 down longer corridors.
- In a powder room as a flush alternative to a pendant.
- In a small bedroom, mudroom, or laundry room with 8-9 ft ceilings.
[QUADRO 45 — 18"]
- In a primary bathroom — large enough to anchor the room without crowding, IP65 rated for shower/tub zones.
- In a foyer or entry with 9-10 ft ceilings as a flush alternative to a chandelier.
- In a larger hallway or gallery wall corridor.
- In a walk-in closet or dressing room with serious scale.
- In a primary bedroom above the bed in homes with lower ceilings (8-9 ft).
[QUADRO 60 — 24"]
- The statement flush mount — in a great room, large primary bedroom, or open-plan kitchen-living-dining with 8-9 ft ceilings where a chandelier would feel too imposing.
- In a large primary bathroom above a freestanding tub or shower zone.
- In a commercial setting — boutique hotel bathroom, restaurant restroom, spa, hospitality ceiling.
- As multiple installations — in long modern hallways, spec'd in pairs or triples for hospitality projects, hotel corridors.
About the alabaster.
Each Quadro is hand-carved from a single block of Italian alabaster — the entire fixture body is one piece of stone, hollowed from the inside to house the bulbs. The carving process: a raw alabaster block is selected and cut to oversize dimensions, then progressively hollowed and refined by hand until the wall thickness is consistent throughout and the surface is polished. The interior is finished to maximize light transmission; the exterior preserves the natural translucency that makes alabaster glow rather than block light.
Because each Quadro starts as a single block, the veining wraps continuously around all four sides. There are no seam lines breaking the natural pattern. The corners read as carved, not assembled.
Selection within the same fixture is consistent — veining patterns continue from one side around to the next. Between fixtures, every Quadro is unique: the alabaster block selected for one fixture won't be selected for another.
Choose the veining at checkout:
- More veining — heavily patterned, dramatic mineral lines
- Less veining — softer, milkier, more uniformly translucent
- Random selection — we choose from stock
About the brass.
The top mounting frame, ceiling plate, and all hardware are solid brass — not plated. Solid because the alabaster's weight (especially Quadro 60 at ~44 lbs) puts continuous load on the mounting frame, and plated brass would wear at the contact points within years.
Default finish is brushed brass. Available in chrome, brushed nickel, or matte black on request — specify at checkout. All finishes at the same price.
IP65 wet-rated as standard.
This is the conversion-critical specification: Quadro ships IP65 wet-rated by default, not as an upgrade. Sealed driver, gasketed canopy, wet-rated LED-compatible socket. Installs in:
- Bathrooms including direct above-shower and above-tub zones
- Covered outdoor areas (covered patios, porches, pool houses)
- Indoor pool decks, spa rooms, sauna anterooms
- Hospitality wet zones (hotel bathrooms, restaurant restrooms, spa ceilings)
Most premium alabaster flush mounts ship damp-rated only — fine for hallways and bedrooms, not approved for direct wet exposure. Quadro's IP65 standard expands the addressable application set significantly and reduces the design risk for buyers specifying bathroom installations.
Bulbs and light.
[QUADRO 35: 2 × G9, max 40W per socket. Total load 80W. Bright enough for primary lighting in a 50 sq ft room.] [QUADRO 45: 3 × G9, max 40W per socket. Total load 120W. Bright enough for primary lighting in a 100 sq ft room.] [QUADRO 60: 4 × G9, max 40W per socket. Total load 160W. Bright enough for primary lighting in a 150-200 sq ft room.]
LED G9 bulbs strongly recommended at all sizes — lower heat protects the alabaster long-term (especially important inside a sealed IP65 enclosure where heat builds up faster), and lower draw allows compatibility with dimmable LED drivers.
Dimmable on TRIAC 120V AC — Lutron Caseta, US residential dimmers, most home automation.
Trade program for multi-unit specifications.
Designers and architects routinely specify Quadro in volume — multiple bathrooms in a residence, hallway sequences, hospitality projects. Our trade program offers:
- 4+ units: 15% off standard pricing
- 8+ units: 20% off
- 20+ units (hospitality scale): contact our trade desk for project pricing and consolidated freight
Trade program requires a design firm name and resale certificate at checkout. Apply at /pages/trade.
Specifications
| Quadro 35 | Quadro 45 | Quadro 60 | |
|---|---|---|---|
| Width × Depth | 14" / 35cm | 18" / 45cm | 24" / 60cm |
| Profile height | 4.7" / 12cm | 4.7" / 12cm | 4.7" / 12cm |
| Bulbs | 2 × G9 | 3 × G9 | 4 × G9 |
| Approx. weight | 13 lbs / 6 kg | 22 lbs / 10 kg | 44 lbs / 20 kg |
- Material: Solid hand-carved Italian alabaster (single block, not panel-assembled) + solid brass frame and hardware (not plated)
- Finish: Brushed brass (default) / chrome / brushed nickel / matte black — same price
- Alabaster veining: Choose more / less / random at checkout
- Bulbs: G9 base, max 40W per socket (LED G9 strongly recommended; bulbs not included)
- Wiring: Hardwired, UL listed for US 120V, CE certified for 220V EU
- Dimmable: Yes — TRIAC 120V AC compatible
- IP rating: IP65 wet-rated standard — approved for direct bathroom, covered outdoor, and wet-zone installation
- Mounting: [QUADRO 35: standard junction box, electrician should confirm.] [QUADRO 45: reinforced blocking recommended.] [QUADRO 60: requires reinforced ceiling blocking at 44 lbs. Standard 50 lb junction box is at maximum capacity — structural mounting strongly recommended.]
- Warranty: 2-year mechanical and electrical
- Note: Each Quadro is hand-carved from a single block of natural alabaster. Veining, color, and translucency variation between fixtures is intrinsic to natural stone. Each fixture is unique.
Please review the full product description carefully to confirm materials, dimensions, and available options.
If you require customization, special sizing, or a modified suspension system, contact us directly for a personalized quotation.
Send your request to contact@casalolalights.com and include:
Product name or Casalola reference code (CL…)
Any specific customization details
Our team will respond with a tailored quote and production guidance.
CASALOLA
- A+++
CSA, UL LISTED, CE, CCC, PSE MARK, RCM
The wattage will be adapted to the customer's location electrical requirements
100V to 240V. The voltage will be adjusted based on the customer's location.
Wipe with a soft, dry cloth
2 years
If not specified, the default light temperature is 3000K (Warm White). For customization options such as light temperature (Cool White or three-color variation) or cable color and length, please leave us a note. If a requested customization is not possible or requires additional fees, our team will contact you within 24 hours.
Logistics
We ship worldwide to the USA, EU, UK, Australia, and Asia. Every lamp is meticulously adapted to your region—voltage, plug type, and safety certifications are customized before dispatch to meet local standards.
Each piece travels in reinforced wooden crates with precision-engineered internal packaging designed to eliminate movement and protect against damage in transit. Your investment arrives in pristine condition.
All shipments include full insurance coverage for complete peace of mind.
10 business days
10 to 15 business days
What our clients say
The alabaster chandelier transformed our dining room into something truly museum-worthy. The craftsmanship is unlike anything we've found elsewhere.
Margaret L.
New York
Exceptional quality and the team was incredibly helpful with custom sizing. Worth every penny.
James R.
London
We've furnished three properties with CASALOLA pieces. The consistency in quality and the beauty of the materials is unmatched.
Sofia D.
Milan
Questions & Answers
Casalola Concierge
For customization, simply leave a note in your cart. We offer the following customization options at no additional cost:
- Cable color for our pendant lamps
- Cable length, adjustable up to 250 cm (or 98 inches)
- The standard color temperature is warm light, but cool light options are also available.
If you would like a dimmable lamp, please contact us prior to placing your order.
30-day returns · Free shipping on defective items · 2-year warranty
View full policy →





















